ATX Networks
RF Management
Home > Products > RF Management > MAXNET II > Ultra-Dense RF & Optical Active Modules

Ultra-Dense RF & Optical Active Modules

The ATX MAXNET II platform offers ultra-dense, single-width combiners, narrowcast amplifiers and return path receivers.

  • Features
  • Specs & Order Info
  • Other Documents
  • Related Products
  • Solutions
  • Fully integrated, ultra-dense, modular, MCX connector-based RF/optical signal management platform
  • DOCSIS® 3.1 and CCAP™ compliant
  • High performance MCX connector receptacles
  • Front access to plug-in locations for pads and EQs
  • Remote monitoring and control via HMS compliant SNMP v2c and/or web browser
  • An ultra-dense active chassis is required for these modules

MPSA8x2 Combiners

  • Active 8-way combiner with 2-way output splitter intended for status monitoring port
  • Overcome excessive losses in narrowcast network due to node splits and passive losses
  • Up to 20 modules will fit in a 3RU ultra-dense active chassis
  • Front access to -20 dB combiner test point
  • High performance specification from 50-1002 MHz

MPSABCNC Combiner

  • Active 8-way combiner with 2-way combiner for passive BC input intended to be used immediately before optical transmitters which do not have dedicated narrowcast ports
  • Overcome excessive losses in narrowcast network due to node splits and passive losses
  • Up to 20 modules will fit in a 3RU ultra-dense active chassis
  • Front access to -20 dB combiner test point (12 dB test point available)
  • High performance specification from 50-1002 MHz

MPSA2-12 Forward Amplifier

  • Dual 12 dB gain amplifier package rated for up to 30 dBmV at output with full 50-1002 MHz analog/digital channel load (note: higher output capable with less channel load)
  • Overcome excessive losses in narrowcast network due to node splits and passive losses
  • Up to 20 modules (40 amplifiers) will fit in a 3RU ultra-dense active chassis

MPSRX-8 Return Path Receiver

  • 5-200 MHz return path receiver with integrated, lossless 8-way splitter
  • Up to 20 modules will fit in a 3RU ultra-dense active chassis
  • Front access to -10 dB splitter test point (bi-directional to allow test insertion)

MPSARXL2 and MPSARXL2F Return Path Receivers with Low Noise Input

  • 5-85 MHz low noise, dual return path receiver
  • Ideal for RFoG and PON applications
  • Industry leading 0.9pA/rtHz Effective Input Noise (EIN) yields best NPR dynamic range at -27 dBm optical input
  • Now with front fiber and rear F connector option (MPSARXL2F)
  • Up to 20 modules will fit in a 3RU ultra-dense active chassis
  • Front access to -20 dB test points

MPSARX2 and MPSARX2F Return Path Receivers with Standard Input

  • 5-200 MHz low noise, dual return path receiver
  • Ideal for standard HFC applications
  • Now with front fiber and rear F connector option (MPSARX2F)
  • Up to 20 modules will fit in a 3RU ultra-dense active chassis
  • Front access to -20 dB test points (MCX)

Space saved, money earned.

Our MAXNET II RF management platform takes the headend to 1.2 GHz bandwidth for DOCSIS® 3.1. Custom broadcast/narrowcast solutions improve rack space density and isolation. Ideal for a CCAP™ and high density eQAM world. Learn more about this product.>